NON-DRIP ENAMEL

A premium grade structured polyurethane-alkyd based coating for Interior applications. Extreme wearing product with good washability ideally suited to interior doors and trim, as well as interior window frames and timber coating.  Non-drip structure for applicator friendliness.

SPREADING RATE

On suitably primed surfaces a spreading rate of 10 - 12 square metres per litre will be achieved.

APPLICATION

Apply only to suitably primed or sealed substrates. Masonry substrates should be sealed using WeatherPrufe Masonry Primer prior to coating. Apply two coats to the prepared and primed substrates using a good quality brush or mohair roller.  Allow 24 hrs between coats.  When repainting surfaces previously coated with enamels, sand down to matt finish before applying the first coat.  Inspect the surface to ascertain if spot priming is required. Apply two coats as above.

ADVANTAGES

Very tough and hard wearing coating
Attractive sheen finish
Highly washable
Good flow and levelling
Non-drip structure for applicator friendliness