WeatherPrufe DRUIWEBAK VERF: Quick drying multi-purpose enamel with highly chemical resistant properties. Can be applied directly to degreased, rust free metal. Good exterior weathering properties and very low water-vapour permeability.


  • Quick drying
  • Resistant to acids and alkalis
  • Self-priming on metal and masonry surfaces
  • Good exterior durability
  • Very low oxygen and water-vapour permeability
  • Can be applied by brush or roller

Spread Rate

Typically 10 square metres per litre.


For metal surfaces, ensure that the surface to be coated is free of oil, dirt and loose material. Wire brush or sand down previously rusted surfaces to metal. Apply with good quality brush or mohair roller. Suitable for application directly to dry masonry surfaces. On friable surfaces the first coat should be thinned up to 10% with Xylene. Over-coating time is 2 hrs. This product should not be used where hydrocarbon solvents, fuels or oil spillages are likely. Clean-up and thinning, where required with Xylene.  Lacquer thinners is NOT suitable for use with this product.

Approved by the Wine Industry This product is suitable for use in areas where it is likely to be in contact with food stuff as it is non-toxic in the dry state.  For this reason too, it is suitable for use as an internal lining for reservoirs or potable water tanks.