WeatherPrufe NON-DRIP ENAMEL:  A premium grade structured polyurethane-alkyd based coating for Interior applications. Extremely hard-wearing product with good washability ideally suited to interior doors and trim, as well as interior window frames and timber coating.  Non-drip structure for applicator friendliness.


  • Very tough and hard wearing coating
  • Attractive sheen finish
  • Highly washable
  • Good flow and levelling
  • Non-drip structure for applicator friendliness

Spread Rate

On suitably primed surfaces a spreading rate of 8 - 10 square metres per litre will be achieved.


Apply only to suitably primed or sealed substrates. Masonry substrates should be sealed using WeatherPrufe Masonry Primer prior to coating, at a spread rate of 8 – 10 sqm per litre, allowing 6 – 8 hours drying time. Apply two coats to the prepared and primed substrates using a good quality brush or mohair roller. Allow 24 hours drying time between coats. When repainting surfaces previously coated with enamels, sand down to matt finish before applying the first coat.  Inspect the surface to ascertain if spot priming is required. Apply two coats as above.